Students watched a video about how to replace a defective plug.
they had to write out the process and correct their answers afterwards!
don't go too fast please!
how to replace a defective plug and a fuse?
PART 1
Number 1:Unscrew and remove the cover of the plug
Number 2:Unscrew the flex clamp
Number 3:Loosen the terminal screws
Number 4: Pull away the wires from the pins
number 5: Remove the wires
number 6: Check the wires aren’t damaged
number 7: Remove the fuse
part 2 : How to install the new plug
number 1:Open the new plug
number 2: Remove the fuse
number 3: Feed the clamp under the flex clamp or between the flex grips
number 4: Connect the brown wire to the live terminal marked L on the right
number 5: Connect the blue wire to the neutral terminal marked N on the left
number 6: Connect the green and the yellow wire to the Earth terminal marked E at the top
number 7: Tighten all the terminal screws
number 8 : Tighten the flex clamp
number 9: Use a new fuse or reuse the old fuse from the old plug
number 10: Finally screw on the cover and you're done!
